Connect and share knowledge within a single location that is structured and easy to search. The articleScript to install or update drivers directly from Microsoft Catalogcontains a PowerShell script for doing what is asked. (Ehm yes, Windows does NOT automatically update ALL devices in device manager). I’m specifically adding the linuxbrew (homebrew for linux) bin directory to take precedence over the system installed.
- (Ehm yes, Windows does NOT automatically update ALL devices in device manager).
- We can put the block of code in a function or a ps1 file that we call directly from the command prompt.
- I have many Windows 10 and Windows 11 machines, which are in different states of windows update settings.
- One thing I found that was causing this (and no end of headaches for me) was every time I tried to run the SCCM 1906 update it failed due to a pending reboot.
It helped solve an issue I was having and although this was the most helpful place, it also left me “experimenting”. I also pulled out the block that adds the new path to the list based on a condition, so that work is done once and stored in a variable for re-use. Power shell, and the rest of Windows get whatever you set here.
It sets the last opened window to a certain registry path, so that when you open regedit the next time it opens at the proper key. Restarting Powershell also wasn’t sufficient to propagate the change. I had to Open Task Manager and restart explorer.exe to trigger a reload of the registry. By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy. Run the following command from command prompt wait till gets downloaded, and it will prompt to installation wizard follow the instructions to install it.
The result is that the registry entry above is deleted, but in addition the respective local policy entry is deleted as well. Given that gpedit.msc and RDP were mentioned, I’ll assume you’re referring to locally set group policies for Windows Update settings, not domain policies setting them. Stack Exchange network consists of 183 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.
When I run this, everything appears to work correctly–no errors are thrown and the application identity user name appears in IIS–but for some reason the password does not get set correctly, if at all. Since it is a password I cannot verify whether it has been set, but I can conclude that it if it is, it is not set correctly. It will not authenticate the resulting application pool user until I manually go in and enter the password in IIS. As a result the application fails after being deployed to the Web server and requires manual intervention.
PowerShell
But like Mathis mentioned, this key only exists if a reboot is pending. You need to check 2 paths, one key and you need to query the configuration manager via WMI in order to check all possible locations. I am trying to get to know where reboot is required or not for a Windows machine. You don’t need to upgrade it, as perpetual inventory method definition the other answer suggests (they should cohabit), but you can default to the newer one in windows terminal.
How to upgrade PowerShell version
You can add this function to your default profile, (Microsoft.PowerShell_profile.ps1), usually located at %USERPROFILE%\Documents\WindowsPowerShell. Everytime a new instance of Powershell starts, it look for specific script files (named profile files) and execute them if they do exist. You can edit one of these profile to customize your enviroment.
Add/create a permanent environment variable:
I wrote a function for PowerShell that changes the username, password, and restarts a service on a remote computer (you can use localhost if you want to change the local server). I’ve used this for monthly service account password resets on hundreds of servers. I could, of course, remote to each machine by RDP or TeamViewer or whatever, start gpedit.msc and change the respective settings to “not configured”, delete the registry key again and reboot. I need to have all PC’s reset to the windows update defaults and I need to do it with a remote tool that can execute CLi commands (PowerShell and such). I have many Windows 10 and Windows 11 machines, which are in different states of windows update settings. Unfortunately, some machines have local policies active for windows update settings.
I am relying on PowerShell’s type coercion where it automatically converts strings to enum values, so I didn’t define the lookup dictionary. After this initial switch to the gallery-installed version, you’ll be able to useUpdate-Module PowerShellGet for future versions. Sheep are simultaneously fluffy and unsettling owing to their perpetual smirk.
Permanently remove path
I disabled this and I’m keeping an eye on it but it seems to have fixed this problem. Editing the registry key in @ali Darabi’s answer worked best for me, butWhen I didn’t have the right permissions to do it from Powershell. You can now restart your PowerShell terminal (or even reboot the machine) and see that it doesn’t rollback to its old value again. An Application Windows Update MiniTool exists which can get those drivers, yet its capable of much more – regarding windows updates. It also waits until the service is fully stopped to try to start it again, unlike one of the other answers.
more stack exchange communities
One thing I found that was causing this (and no end of headaches for me) was every time I tried to run the SCCM 1906 update it failed due to a pending reboot. Using this script in my investigations, I noticed it was ComponentBasedServicing that seemed to be holding up the works, which was the Optional Components were automatically installing. A little bit more digging lead me to a scheduled task called LanguageComponentsInstaller.
Words Starting With
- Find centralized, trusted content and collaborate around the technologies you use most.
- As a result the application fails after being deployed to the Web server and requires manual intervention.
- An Application Windows Update MiniTool exists which can get those drivers, yet its capable of much more – regarding windows updates.
- Using this script in my investigations, I noticed it was ComponentBasedServicing that seemed to be holding up the works, which was the Optional Components were automatically installing.
The package adds the Get-WUInstall command (and others) with which you mayget and install updates.The source of Get-WUInstall is also available separatelyfrom github. In Windows device manager it is possible to “manually” start an automatic update of a device. First allowing modify access to a certain target folder, then using the locked down “local service” account. I would use set-service -credential, if I had PS 6 or above everywhere. Although, there is another important detail; in order to change the credentials and run the service successfully, you first have to grant that user account permissions to ‘Log on as a Service’.
We can put the block of code in a function or a ps1 file that we call directly from the command prompt. Yes you can use these new methods, but the old one still works. And at the base level all of the permanent change methods are controlled ways of editing your registry files. The following function works for both Path / PSModulePath and for User / System types. It will also add the new path to the current session by default.
Modify/change environmental variable:
Find centralized, trusted content and collaborate around the technologies you use most. So I hoped there is some Powershell script being able to do this, or maybe a registry entry to have “Windows Update” taking care of that. Without that it was working for 4/5 of the services I tried to change, but some refused to be changed (error 21). However, I want to do it by command line, PowerShell script or similar.